How to make a chandelier with your own hands.

Learn how to make a light fixture from a wire construction mesh so that flowers bloom inside it. How can a snatch be turned into a lamp, and the branches of a tree be turned into a floor lamp?

How to make a real lamp?

The piece of very attractive design is available from simple materials, most of which are from picnics. If you go out into nature with friends, relatives, then you must remove the trash afterward. If you are asked to fold the plastic spoons separately, it is not always a desirable job If the kids come with you, arrange a competition, who will throw the spoons more and faster in a separate garbage bag or bags.

How to make a chandelier with your own hands.

You will also need a water canister. After a fun picnic, arriving home, shortly after, you can make original lamps from the rest of the packaging at the end of the feast. Give these to your friends, hang them for yourself in the hallway, kitchen, or country.

How to make a chandelier with your own hands.

So, here is how to make this kind of shaking with your own hands or with the help of home. Stay side by side first:

7-liter oval plastic bottle;

  • Disposable plastic spoons;
  • Cables with sockets and plugs;
  • Low power LED light bulb;
  • Plus;
  • Glue gun;
  • Screwdriver;
  • Stationery knife.

To prevent such lamps from catching fire, take an LED, not an ordinary incandescent light bulb. For information: 4-5 W LED bulbs 40 W, and 8-10 W – 60 W related to conventional electronics.

Carefully remove the bottom of the coconut with a knife so as not to cut yourself.

How to make a chandelier with your own hands.

Also, to protect yourself from harm cut off the handles of each plastic spoon completely. Glue the bottom layer of the bottle using a little hot glue from a gun on the “shoulder blade” cuts. Usually, 17 pieces go here. Then, connect the second and subsequent rows by placing the elements in a checkerboard pattern with overlap.

To cover the neck, make a ring together with 10-12 scoops of glue.

Pass the light bulb and the bulb holder with the wire through the hole in the bottom of the cut of the bottle. If this “electric” part is hard for women, call your husband. If you don’t have it, buy a cable from a hardware store with a socket and a screwed plug already in it. You can borrow this functional part of the lamp from the old one.

Place a “ring” of spoons on top of the canister, screw the id. To do this, the husband drills a hole in it with a drill and you can manually do this manipulation with a hot nail or self-tapping screw, holding it to the players. The real lamp is ready.

 

3 model designer lampshade with your own hands

Ideas are in the air. If you live in a country and don’t find any pieces of furniture that are easy to make yourself from what you have on hand. Accept:

  • Empty dishes;
  • Telegram;
  • Foam;
  • Gloves;
  • Color;
  • Brush;
  • Plus.

Unexpected things can be used as a basis: an old saucepan, a flower pot, an already unnecessary baby pot.

Turn any one of these helpful items over and over on a plane. Wrapping the wire, its turn repeats the shape of the future product, which should be the same as the lampshade. In your own hand, but with gloves, take a spray can in your hand, take out some foam from it on top of the frame, close the wire, let it dry.

Next, make more connections with the knife by trimming extra. Paint in your desired color, white to look cool and elegant. This kind of lampshade made by your own hands will decorate the summer cottage. You can create a few and hang them here. This is how you decorate the place, avoiding big expenses.

The e-lampshade looks stylish and modern, the latter has a classic look. To use it:

  • Thick wire;
  • Plus;
  • A small plastic water bottle.

Let’s start making the lampshade with our own hands by making the upper part of the center. To do this, wind 1 turn of wire on the bottle, remove it, cut off the excess, twist the edges to make a ring. Its diameter should be such that the cartridge can be threaded from the bottom and it is kept in the ring, not coming out from the top.

Now roll the big outer ring out of the wire. We’ll fix that. To do this, cut 4 identical pieces with pluses and fix the first end of each of the tops of the small and the second end of the larger ring. The upper part of the lamp is ready.

 

Depending on the dimensions of the lampshade, the first one made for hanging from a ceiling or table lamp is larger than the second one.

Rotate the bottom ring out of the wire, it is the largest. Connect it to the five wires on the second top, spreading them evenly. It remains to arrange the frame of the lampshade. To do this, pass the wire through the second ring, twisting it in a wave and twisting it with the base. Design the second ring as well.

It remains to mix it with the fabric. Attach the flap to the bottom ring from the second top ring, cut into shapes, add to the seam. Cut out the larger sides of the resulting rectangle. Sew the fabric directly from the side of the frame, decorate this place with bread. That’s it, you made a great lampshade with your own hands.

If you want to get acquainted with the latest ideas on this subject – please! With skilled hands, the construction mesh will turn into a stylish lampshade.

Cut a rectangle in your own hand or with a man called scissors for metal from him. To fix the cartridge, twist a circle from it, fix it to the top of the lamp with four pieces of wire.

If you do not have a thick mesh, use pliers to trim extra sections to increase the distance between the wire strips. Paint the lampshade and the frame is ready.

And now the magic begins. You can create an original lamp that will benefit not only humans but also plants. Attach a flowerpot with a flower to the bottom of the lampshade. You can knit using the Macram technique, down the wire with a thick rope. Check that the mount is safe.

If there is a man and delaying machine in the house, encourage this tandem to make a metal ring with “rays’ ‘ which needs to be idled under the lamp.

 

If you have an indoor climbing plant like Ivy, run the lash into the trellis net. The real lamp will turn into a flower house. It is better not to use ordinary light bulbs, as they are very hot and can burn the leaves. Also, the air around the flowers will be very hot. Screw an LED or fluorescent light bulb.

  • For real lamps like this you need:
  • Construction mesh or hardwire;
  • Brush and paint (alchemical);
  • Plus;
  • Light bulb with a cartridge;
  • Flowers.

You can fix the cups well with seedlings in such a lampshade, then look for additional space to grow it and conditions for lighting in the evening.

We made a floor lamp, table lamp with our own hands

When walking in the woods, don’t go through the ornate driftwood lying around. Put it in a bag, keep it with you. Wash at home, if there is peel, clean it with a knife. Rub on the surface with fine sandpaper, if necessary. Cover with wood varnish.

To keep the table lamp in good condition, the snap needs to be screwed into a tight-fitting with self-tapping screws. It has to be heavy enough. Oak is perfect for him. If you find a broken branch of this tree in the same forest, try closing a 5-7 cm thick circle from the dense part.

It will need to be sanded and colored. Once these wood hooks are dry, attach them with self-tapping screws of sufficient length, first pass them through the oak stand and then drive them in a snatch way. Bolts and nuts can also be used.

You already know how to make a lampshade with your own hands. Therefore, make it and attach it to the driftwood, tying it to the wire.

If the old floor lamp stand is no longer happy or you just want to decorate it, use wood for it too. See how good it is to see birch racks. Attach a branch of this tree to the lamp and see what kind of floor lamp you can make with your own hands.

How to crochet a lampshade?

If you are bothered by an old floor lamp, you can convert it with your own hands with “encouragement”. Take the lace tape and sew it on top and bottom of the fabric lampshade. You can individually or randomly decorate glitters with glue in the form of any pattern.

A floor lamp or chandelier will be unique if you weave the lampshade with your own hands. This can be done with a crochet or fine knitting needles. For the first option, you will need:

  • Hook;
  • Cotton thread;
  • Pattern for knitting napkins;
  • Water;
  • Starch;
  • Ribbon.

You can use such a pattern for a napkin, for example.

To measure the top circumference of the lampshade, we need to tie a chain from the needed air loops. Next, knit in a circle based on the pattern of the napkin. Measure the height of the lampshade and the diameter of the circle below it. Based on this data, draw a trapezoid or rectangle (depending on the size of the lampshade). This size crochet. Sew on the side.

Use a single crochet stitch to tie the top circle of the lamp and this trapezoidal or rectangular part.

Boil one glass of water, stir, pour 1.5 ml of 200 ml cold water which is 1.5 tbsp. I boil the starch for 1 minute, remove it from heat, cool. Place the knitted lampshade down here, soak well, then wrinkle, drain the water and let the canvas dry, but keep it slightly damp.

Keep in the shade. To keep the knitted lampshade well, you can omit a few ribbons or ribbons between the loops, tying them.

Plafonds look very beautiful decorated with crocheted flowers.

A solution of starch or PVA will help shape the woven lampshade. Place it in the frame, glue, let dry.

In the second case (when knitting needles are used), you need to calculate for knitting, draw a pattern by the values ​​of the lamp, and knit the trapezoidal or rectangular lampshade. Such models are suitable for floor lamps, rigidly sized chandeliers. If you want to crochet a semicircular lampshade, first make wedges and then attach them to single crochet.

There is one more openwork chandelier here. It is beautiful to make a muslin with your own hands and decorate the bottom of the product in a circle. But first, you have to make the lampshade yourself. The crochet pattern for this beautiful thing is presented right there.

 

A table lamp on the bedside table will look amazing if it has a lampshade on it, which is also given a knitting pattern.

If your son or daughter doesn’t let you finish the task demanding attention, invite the kids to make a lampshade, twisting paper strips into tubes with their own hands. It is best to wrap these in a thin pencil or wooden sushi stick and then glue the edge freely so that it does not rise.

Now you need to glue the applied gaps using an object of suitable size as a frame, for example, a 5-liter canister. By creating the first inner layer, let the child go to the second to have several of them to close the gaps. When the PVA is dry, cover the table lamp with this lampshade or hang it from the ceiling. It looks original and brazen.

It is important to take care of the interior space, to think about every little thing. After all, we all subconsciously strive for comfort and it is the smallest detail that can create a special atmosphere, conveying the general idea, mood, and character of the house. Professional designers strongly claim and internally prove that the right choice of chandeliers can not only decorate the interior of a house but also make life brighter and more fun. Beautiful shades for chandeliers with an original design give the lamps a special grace and gloss. In this article you can get acquainted (gain, obtain) with present-day techniques that came with it. A detailed, step-by-step master class, as well as a visual photo, will be of great help to you in this exciting process.

Material selection

When making chandeliers, it is difficult to make a single component that can meet all the requirements. Each of them has its own distinctive features and characteristics. Paper, for example, which is the simplest and most affordable material, lends itself well to conversion.

Luminaires made with glass shards and metal strips have a dazzling shiny and beautiful look. Wood and fabric add warmth and comfort to the interior. Lacey lampshades are distinguished by their special beauty, captivating everyone at first sight.

In a word, you can make a chandelier with your own hands from anything, the main thing is to be smart in time and turn on the imagination.

We will describe in detail in this article how in a simple object you will see its creative potential for creating exclusive decor elements.

The step-by-step instructions with details of each activity will help you create incredibly beautiful and unique lamps from temporary ways that will be a great addition to your favorite interior.

What you need to pay attention to before making a chandelier

Many are interested in how to properly create a chandelier and other rooms. After all, I want this element of the interior to be not

only beautiful but also functional.

On the one hand, a chandelier is a lighting device capable of providing a suitable level of illumination in an apartment. Indeed, much depends on the choice of lighting in the room, including eye protection. On the other hand, I want the ceiling structure to complement the interior design, creating a special atmosphere of warmth and comfort.

When making chandeliers, the first thing to consider is the height of the ceiling. For example, a chandelier with a bar mount is suitable for fewer people. So, the ceiling will visually look higher if the ceilings are higher – 3 meters and more, but it is better to choose the pendant with a hook mount.

 

Lamp selection

  • For any room, you need to individually interact with its light intensity.
  • A small bathroom will take 80-100 watts.
  • The kitchen requires a minimum of 120-150 watts of lamp power.
  • The living room and hall can not do without light bulbs in the range of 150-300 W.
  • The number of lamps and the power is calculated based on established values ​​- 1 watt requires 20 watts ² of electricity. The
  • parameters of the house, its dimensions, and reflective features 
  • also need to be considered,
  • Edison’s designer lamps – beautiful and unusual to look at

Plafond decor

The appearance, decor, and design of the plafond give an important place to the design of the chandelier. It is chosen for the interior of the house depending on the style. For crystals, metals and glass for classic, wood will fit perfectly in-country or chalet style, fabric, and silk will fit perfectly for Provence style.

To illuminate a house on several levels, you can additionally create wall sconces or floor lamps.

Step-by-step production workshop

You do not want to be frustrated if you cannot get the right pitch so invest in a good capo. Take a look around, you have something in your home that you haven’t used in a long time. And who knows, maybe they will become the main thing in making real lamps. Moreover, the internet now has enough ideas and inspiration for creativity.

Important! It is best to look for the necessary things from the kitchen or porch. It’s there where we store all sorts of traces that were once necessary for us and with which it often happens, so hard to share later.

Spectacular mug chandeliers

As strange as it sounds, it is the most unusual and attractive model of lamps found in dishes and other kitchen utensils. For example, tea mugs are the ideal material for making spectacular lighting fixtures.

What we need for the job:

  • 8 mugs
  • Saucer
  • Exercise
  • Porcelain drill with special holes

We create quickly and easily

  1. At the bottom of the mug, we make a small hole for the wire with a drill, attach the electrical cartridge and pull the wire out. It is advisable to close the hole with the plaster mixture.
  1. After that, the mug must be glued to the saucer, where there should also be a hole, a light bulb set should be inserted and the newly built lamp should be hung in the right place.

Sharing is caring!

Leave a Comment